Forklift Training Programs Glendale

Forklift Training Programs Glendale - If you are searching for work as an operator of a forklift, our regulatory-compliant forklift training programs provide excellent instruction in many types and styles of lift trucks, classes on pre-shift check, fuel kinds and dealing with fuels, and safe utilization of a lift truck. Practical, hands-on training helps participants in acquiring basic operational skills. Program content consists of existing regulations governing the use of forklifts. Our proven forklift programs are meant to offer training on these kinds of trucks: powered pallet truck, narrow isle forklift and counterbalanced forklift.

How to Handle Loads Safely

Do not raise or lower the fork while the forklift is moving. A load must not extend over the backrest due to the danger of the load sliding back toward the operator. Check for overhead obstructions and make sure there is adequate clearance before lifting a load. Stay away from overhead power lines. Once the load is raised straight up, tilt it back slightly.

The lift truck is less stable when a load is in a raised position. Make sure that no one ever walks beneath the elevated fork. The operator should not leave the lift truck while the load is raised.

When handling pallets, forks should be level and high enough to go into the pallet and extend all the way underneath the load. The width of the forks should provide equal weight distribution.

Prior to unloading or loading the truck, chock the wheels and set the brakes. Floors must be strong enough to support the weight of the forklift and the load combined. Fixed jacks can be installed in order to support a semi-trailer which is not attached to a tractor. The height of the entrance door should clear the forklift height by a minimum of 5 cm. Mark edges of ramps, docks or rail cars and avoid them.

Do not stay in a forklift for long periods without right ventilation. The inside of the truck must be well lighted and free of loose objects, obstructions and trash. Inspect for holes in the floor. The installation of material that are non-slip on the floor would help prevent slipping. Clear any obstacles from dockplates and docks and make sure surfaces are not oily or wet.

Never push or tow other vehicles using a lift truck.

Click to Download the pdf